ISPLSI 2096A-125LT128
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2096 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 4000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 3 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2096A-125LT128 Overview
96 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is contained in package [0].In this case, there are 96 I/Os programmed.128terminations have been programmed into the device.This electrical part is wired with a terminal position of QUAD.There is 5V voltage supply for this device.This part is part of the family [0].The chip should be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].Chips should be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispLSI? 2000A series.A chip with 128pins is programmed.When using this device, YESis also available.The ISPLSI 2096shows its related parts.It is possible to construct digital circuits using 4000gates, which are devices that serve as building blocks.A total of 24logic elements/blocks are present.This device runs on 5Vvolts of electricity.The maximal supply voltage (Vsup) reaches 5.25V.It has 3dedicated inputs for detecting input signals.It is important that the supply voltage (Vsup) exceeds 4.75VV.A frequency of 100MHzshould not be exceeded by its clock.
ISPLSI 2096A-125LT128 Features
128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
5V power supplies
ISPLSI 2096A-125LT128 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2096A-125LT128 CPLDs applications.
- Auxiliary Power Supply Isolated and Non-isolated
- USB Bus
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Boolean function generators
- Wide Vin Industrial low power SMPS
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Parity generators
- Address decoding
- STANDARD SERIAL INTERFACE UART
- Multiple Clock Source Selection
