ISPLSI 2096A-80LTN128I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 2096 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 57MHz |
| Propagation Delay | 18.5 ns |
| Number of Gates | 4000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 3 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 15ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
ISPLSI 2096A-80LTN128I Overview
There are 96 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is embedded in the 128-LQFP package.It is equipped with 96I/O ports.There are 128 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The device is powered by a voltage of 5V volts.It is a part of family [0].Package the chip by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].The chip should be mounted by Surface Mount.In FPGA terms, it is a type of ispLSI? 2000Aseries FPGA.It is programmed with 128 pins.It is also characterized by YES.The ISPLSI 2096shows its related parts.4000gates are used to construct digital circuits.This logic element/block contains 24logic elements.It runs on 5Vvolts of power.The maximal supply voltage (Vsup) reaches 5.5V.To detect input signals, there are 3 dedicated inputs.The supply voltage (Vsup) should be greater than 4.5V.The clock frequency should not exceed 57MHz.
ISPLSI 2096A-80LTN128I Features
128-LQFP package
96 I/Os
The operating temperature of -40°C~85°C TA
128 pin count
5V power supplies
ISPLSI 2096A-80LTN128I Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2096A-80LTN128I CPLDs applications.
- POWER-SAVING MODES
- Pattern recognition
- Address decoders
- PULSE WIDTH MODULATION (PWM)
- Voltage level translation
- I/O expansion
- Interface bridging
- Configurable Addressing of I/O Boards
- State machine design
- LED Lighting systems
