ISPLSI 2096E-135LQ128
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-BQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000E |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2096 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 100MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 4000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 3 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2096E-135LQ128 Overview
There are 96 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the 128-BQFPpackage, you will find it.As a result, it has 96 I/O ports programmed.There are 128 terminations programmed into the device.This electrical part is wired with a terminal position of QUAD.A voltage of 5V is used as the power supply for this device.There is a part in the family [0].Trayshould be used to package the chip.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.Chips should be mounted by Surface Mount.It is a type of FPGA belonging to the ispLSI? 2000E series.It is equipped with 128 pin count.When using this device, CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vis also available.In accordance with the [0], its related parts are listed.4000gates are used to construct digital circuits.A total of 24logic elements/blocks are present.Currently, it is powered by 3.3/55Vsources.5.25Vrepresents the maximal supply voltage (Vsup).To detect the status of input signals, there are 3dedicated inputs.Vsup (supply voltage) must be greater than 4.75V.The clock frequency of the device should not exceed 100MHz.
ISPLSI 2096E-135LQ128 Features
128-BQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
3.3/55V power supplies
ISPLSI 2096E-135LQ128 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2096E-135LQ128 CPLDs applications.
- White goods (Washing, Cold, Aircon ,...)
- Configurable Addressing of I/O Boards
- ROM patching
- Dedicated input registers
- Boolean function generators
- Wide Vin Industrial low power SMPS
- I/O PORTS (MCU MODULE)
- Random logic replacement
- Complex programmable logic devices
- I2C BUS INTERFACE
