ISPLSI 2096VE-100LT128
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | ISPLSI 2096 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 77MHz |
| Propagation Delay | 13 ns |
| Number of Gates | 4000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2096VE-100LT128 Overview
Currently, there are 96 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.128-LQFPis the package in which it resides.It is programmed with 96 I/Os.The termination of a device is set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.A voltage of 3.3Vprovides power to the device.It is included in Programmable Logic Devices.Package the chip by Tray.Ensure its reliability by operating at [0].Mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the ispLSI? 2000VE series.Chips are programmed with 128 pins.It is also possible to find YESwhen using this device.Its related parts can be found in the [0].As a building block for digital circuits, there are 4000gates.There are 24 logic elements or blocks present.The system runs on a power supply of 3.3V watts.In this case, the maximum supply voltage (Vsup) is 3.6V.Input signals are detected using 2dedicated inputs.Voltage supply (Vsup) should be higher than 3V.It should not exceed 77MHzin its clock frequency.
ISPLSI 2096VE-100LT128 Features
128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
3.3V power supplies
ISPLSI 2096VE-100LT128 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2096VE-100LT128 CPLDs applications.
- Power automation
- I/O PORTS (MCU MODULE)
- DMA control
- Parity generators
- PULSE WIDTH MODULATION (PWM)
- Portable digital devices
- Storage Cards and Storage Racks
- I2C BUS INTERFACE
- Reset swapping
- LED Lighting systems
