ISPLSI 2096VE-135LT128I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | ISPLSI 2096 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 4000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2096VE-135LT128I Overview
There are 96 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).You can find it in package [0].It is equipped with 96I/O ports.128terminations have been programmed into the device.This electrical part is wired with a terminal position of QUAD.The power source is powered by 3.3Vvolts.There is a part in the family [0].Package the chip by Tray.Due to its reliability, it is operated at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispLSI? 2000VE series.In this chip, the 128pins are programmed.The device can also be used to find [0].Its related parts can be found in the [0].A digital circuit can be constructed using 4000gates.There are 24 logic elements or blocks present.This device runs on 3.3Vvolts of electricity.A maximum supply voltage (Vsup) of 3.6V is provided.A total of 2dedicated inputs are available for the purpose of detecting input signals.The supply voltage (Vsup) should be greater than 3V.It should not exceed 100MHzin terms of clockfrequency.
ISPLSI 2096VE-135LT128I Features
128-LQFP package
96 I/Os
The operating temperature of -40°C~85°C TA
128 pin count
3.3V power supplies
ISPLSI 2096VE-135LT128I Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2096VE-135LT128I CPLDs applications.
- STANDARD SERIAL INTERFACE UART
- Battery operated portable devices
- Address decoders
- Boolean function generators
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Custom shift registers
- I2C BUS INTERFACE
- Synchronous or asynchronous mode
- LED Lighting systems
- Voltage level translation
