ISPLSI 2096VE-135LTN128I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISPLSI 2096 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 4000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
ISPLSI 2096VE-135LTN128I Overview
There are 96 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is embedded in the 128-LQFP package.There are 96 I/Os programmed in it.The termination of a device is set to [0].This electrical component has a terminal position of 0.It is powered by a voltage of 3.3V volts.This part is in the family [0].The chip should be packaged by Tray.The operating temperature of the machine is -40°C~85°C TA to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispLSI? 2000VE series.There are 128 pins on the chip.If this device is used, you will also be able to find [0].The ISPLSI 2096indicates that related parts can be found.4000gates are used to construct digital circuits.There are 24 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.A power supply of 3.3Vis required to operate it.Initially, the maximum supply voltage (Vsup) is 3.6V.A total of 2dedicated inputs are available for the purpose of detecting input signals.Voltage supply (Vsup) should be higher than 3V.It is recommended that the clock frequency not exceed 100MHz.
ISPLSI 2096VE-135LTN128I Features
128-LQFP package
96 I/Os
The operating temperature of -40°C~85°C TA
128 pin count
3.3V power supplies
ISPLSI 2096VE-135LTN128I Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2096VE-135LTN128I CPLDs applications.
- Programmable polarity
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- High speed graphics processing
- Portable digital devices
- Timing control
- Digital designs
- Software-driven hardware configuration
- Reset swapping
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Synchronous or asynchronous mode
