ISPLSI 2128A-80LQ160
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 160-BQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 160 |
| JESD-30 Code | S-PQFP-G160 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 128 |
| Clock Frequency | 57MHz |
| Propagation Delay | 18.5 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 15ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2128A-80LQ160 Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is part of the 160-BQFP package.This device has 128 I/O ports programmed into it.There are 160 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical component is QUAD.Power is supplied by a voltage of 5V volts.This part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In FPGA terms, it is a type of ispLSI? 2000Aseries FPGA.160pins are programmed on the chip.When using this device, YESis also available.Its related parts can be found in the [0].6000gates are used to construct digital circuits.32logic blocks/elements are present.In order for the device to operate, it requires 5V power supplies.Initially, the maximum supply voltage (Vsup) is 5.25V.The input signals are detected by 4dedicated inputs.It is important that the supply voltage (Vsup) exceeds 4.75VV.The clock frequency of this device should not exceed 57MHz.
ISPLSI 2128A-80LQ160 Features
160-BQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
160 pin count
5V power supplies
ISPLSI 2128A-80LQ160 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128A-80LQ160 CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Interface bridging
- Address decoding
- Programmable polarity
- ROM patching
- Auxiliary Power Supply Isolated and Non-isolated
- Reset swapping
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Digital systems
- Handheld digital devices
