ISPLSI 2128A-80LTN176
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 176 |
| JESD-30 Code | S-PQFP-G176 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 128 |
| Clock Frequency | 57MHz |
| Propagation Delay | 18.5 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 15ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | RoHS Compliant |
ISPLSI 2128A-80LTN176 Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.You can find it in package [0].It is equipped with 128I/O ports.There are 176 terminations programmed into the device.This electrical component has a terminal position of 0.A voltage of 5Vprovides power to the device.It belongs to the family [0].It is recommended that the chip be packaged by Tray.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.The FPGA belongs to the ispLSI? 2000A series.Chips are programmed with 176 pins.When using this device, YEScan also be found.ISPLSI 2128contains its related parts.In digital circuits, 6000gates serve as building blocks.A logic element or block has 32elements.It runs on a voltage of 5Vvolts.In this case, the maximum supply voltage (Vsup) reaches 5.25V.It has 4dedicated inputs for detecting input signals.Vsup (supply voltage) must be greater than 4.75V.The clock frequency should not exceed 57MHz.
ISPLSI 2128A-80LTN176 Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
176 pin count
5V power supplies
ISPLSI 2128A-80LTN176 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128A-80LTN176 CPLDs applications.
- Interface bridging
- Digital multiplexers
- PULSE WIDTH MODULATION (PWM)
- Multiple DIP Switch Replacement
- Portable digital devices
- ON-CHIP OSCILLATOR CIRCUIT
- PLC analog input modules
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Boolean function generators
- STANDARD SERIAL INTERFACE UART
