ISPLSI 2128E-100LT176
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 176 |
| JESD-30 Code | S-PQFP-G176 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 128 |
| Clock Frequency | 77MHz |
| Propagation Delay | 13 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000E |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
ISPLSI 2128E-100LT176 Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).176-LQFPis the package in which it resides.There are 128 I/Os on the board.Devices are programmed with terminations of [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.An electrical supply voltage of 5V is used to power it.It is a part of family [0].Trayshould be used to package the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.It belongs to the ispLSI? 2000Eseries of FPGAs.There are 176pins on the chip.The ISPLSI 2128can be used to identify its related parts.There are 6000 gates, which are devices that acts as a building block for digital circuits. This logic block consists of 32logic elements.There is 3.3/55V power supply available for it.In this case, the maximum supply voltage (Vsup) reaches 5.25V.A total of 4dedicated inputs are available for detecting the status of input signals.There should be a higher supply voltage (Vsup) than 4.75V.It should not exceed 77MHzin its clock frequency.
ISPLSI 2128E-100LT176 Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
176 pin count
3.3/55V power supplies
ISPLSI 2128E-100LT176 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128E-100LT176 CPLDs applications.
- Random logic replacement
- Pattern recognition
- Code converters
- State machine control
- Storage Cards and Storage Racks
- Programmable power management
- Synchronous or asynchronous mode
- Reset swapping
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Handheld digital devices
