ISPLSI 2128E-135LT176
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000E |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 256 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 176 |
| JESD-30 Code | S-PQFP-G176 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 128 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2128E-135LT176 Overview
128macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.176-LQFPis the package in which it resides.There are 128 I/Os programmed in it.The device is programmed with 176 terminations.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered by a voltage of 5V volts.It is included in Programmable Logic Devices.It is packaged in the way of Tray.To ensure reliability, the device operates at a temperature of [0].There should be a Surface Mounton the chip.As part of the ispLSI? 2000Eseries, it is a type of FPGA.The chip is programmed with 176 pins.In accordance with the [0], its related parts are listed.A digital circuit is built using 6000gates.There are 32 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.Currently, it is powered by 3.3/55Vsources.Vsup reaches 5.25Vas the maximum supply voltage.The status of input signals is detected by 4dedicated inputs.Ensure that the supply voltage (Vsup) exceeds 4.75V.The clock frequency of this device should not exceed 100MHz.
ISPLSI 2128E-135LT176 Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
176 pin count
3.3/55V power supplies
ISPLSI 2128E-135LT176 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128E-135LT176 CPLDs applications.
- Preset swapping
- Synchronous or asynchronous mode
- Voltage level translation
- DDC INTERFACE
- Reset swapping
- POWER-SAVING MODES
- Storage Cards and Storage Racks
- I/O PORTS (MCU MODULE)
- Software-Driven Hardware Configuration
- Interface bridging
