ISPLSI 2128E-180LT176
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000E |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 176 |
| JESD-30 Code | S-PQFP-G176 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 128 |
| Clock Frequency | 125MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2128E-180LT176 Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.176-LQFPis the package in which it resides.The device has 128inputs and outputs.There are 176 terminations programmed into the device.Its terminal position is QUAD.The power source is powered by 5Vvolts.It is included in Programmable Logic Devices.It is packaged in the way of Tray.Due to its reliability, it is operated at a temperature of [0].Mount the chip by Surface Mount.It is a type of FPGA belonging to the ispLSI? 2000E series.There are 176 pins on the chip.Additionally, this device is capable of displaying [0].The ISPLSI 2128indicates that related parts can be found.A digital circuit is built using 6000gates.There are 32 logic elements/blocks.A power supply of 3.3/55Vis required to operate it.5.25Vrepresents the maximal supply voltage (Vsup).The status of input signals is detected by 4dedicated inputs.It should be possible for Vsup to exceed 4.75Vat the supply voltage.It should not exceed 125MHzin terms of clockfrequency.
ISPLSI 2128E-180LT176 Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
176 pin count
3.3/55V power supplies
ISPLSI 2128E-180LT176 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128E-180LT176 CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- Power Meter SMPS
- Wide Vin Industrial low power SMPS
- Software-Driven Hardware Configuration
- D/T registers and latches
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- STANDARD SERIAL INTERFACE UART
- POWER-SAVING MODES
- I/O expansion
- Page register
