ISPLSI 2128VE-100LB100
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LFBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 100 |
| JESD-30 Code | S-PBGA-B100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 77MHz |
| Propagation Delay | 13 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.5mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2128VE-100LB100 Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.You can find it in package [0].It is equipped with 64I/O ports.There is a 100terminations set on devices.BOTTOMis the terminal position of this electrical part.The device is powered by a voltage of 3.3V volts.It is included in Programmable Logic Devices.Trayshould be used to package the chip.Ensure its reliability by operating at [0].Mount the chip by Surface Mount.It is a type of FPGA belonging to the ispLSI? 2000VE series.It has 100pins programmed.If this device is used, you will also be able to find [0].In accordance with the [0], its related parts are listed.A digital circuit is built using 6000gates.In total, there are 32 logic elements/blocks.The system runs on a power supply of 3.3V watts.A maximum supply voltage (Vsup) of 3.6V is provided.The input signals are detected by 4dedicated inputs.The supply voltage (Vsup) should be greater than 3V.This device should not have an clock frequency greater than 77MHz.
ISPLSI 2128VE-100LB100 Features
100-LFBGA package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
3.3V power supplies
ISPLSI 2128VE-100LB100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128VE-100LB100 CPLDs applications.
- Digital designs
- Multiple DIP Switch Replacement
- White goods (Washing, Cold, Aircon ,...)
- I2C BUS INTERFACE
- I/O expansion
- Power up sequencing
- Configurable Addressing of I/O Boards
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Battery operated portable devices
