ISPLSI 2128VE-100LT176
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 176 |
| JESD-30 Code | S-PQFP-G176 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 128 |
| Clock Frequency | 77MHz |
| Propagation Delay | 13 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2128VE-100LT176 Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is contained in package [0].There are 128 I/Os programmed in it.It is programmed that device terminations will be 176 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.It is powered by a voltage of 3.3V volts.This part is included in Programmable Logic Devices.Trayis the packaging method.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.Chips should be mounted by Surface Mount.FPGAs belonging to the ispLSI? 2000VEseries contain this type of chip.Chips are programmed with 176 pins.The device can also be used to find [0].The ISPLSI 2128indicates that its related parts can be found.6000gates are used to construct digital circuits.A total of 32logic elements/blocks are present.A power supply of 3.3Vis required to operate it.3.6Vis the maximum supply voltage (Vsup).It has 4dedicated inputs for detecting input signals.There should be a higher supply voltage (Vsup) than 3V.clock frequency should not exceed [0].
ISPLSI 2128VE-100LT176 Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
176 pin count
3.3V power supplies
ISPLSI 2128VE-100LT176 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128VE-100LT176 CPLDs applications.
- Configurable Addressing of I/O Boards
- DMA control
- State machine control
- Bootloaders for FPGAs
- POWER-SAVING MODES
- Custom shift registers
- Cross-Matrix Switch
- State machine design
- Power Meter SMPS
- Parity generators
