ISPLSI 2128VE-100LTN100
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 77MHz |
| Propagation Delay | 13 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
ISPLSI 2128VE-100LTN100 Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.100-LQFPis the package in which it resides.This device has 64 I/O ports programmed into it.The device is programmed with 100 terminations.The terminal position of this electrical component is QUAD.Power is supplied by a voltage of 3.3V volts.There is a part in the family [0].The chip should be packaged by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.This type of FPGA is a part of the ispLSI? 2000VE series.It is equipped with 100 pin count.It is also possible to find YESwhen using this device.According to the ISPLSI 2128, its related parts can be found.As a building block for digital circuits, there are 6000gates.This logic element/block contains 32logic elements.There is 3.3V power supply available for it.In this case, the maximum supply voltage (Vsup) reaches 3.6V.A total of 4dedicated inputs are available for detecting the status of input signals.Ensure that the supply voltage (Vsup) exceeds 3V.A frequency of 77MHzshould not be exceeded by its clock.
ISPLSI 2128VE-100LTN100 Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
3.3V power supplies
ISPLSI 2128VE-100LTN100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128VE-100LTN100 CPLDs applications.
- Interface bridging
- Programmable polarity
- DMA control
- Software-driven hardware configuration
- Battery operated portable devices
- Digital multiplexers
- Power up sequencing
- POWER-SAVING MODES
- White goods (Washing, Cold, Aircon ,...)
- ToR/Aggregation/Core Switch and Router
