ISPLSI 2128VE-100LTN176
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 176 |
| JESD-30 Code | S-PQFP-G176 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 128 |
| Clock Frequency | 77MHz |
| Propagation Delay | 13 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | RoHS Compliant |
ISPLSI 2128VE-100LTN176 Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The product is contained in a 176-LQFP package.There are 128 I/Os on the board.It is programmed to terminate devices at [0].This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 3.3V is used as the power supply for this device.There is a part in the family [0].Package the chip by Tray.During operation, the operating temperature is kept at 0°C~70°C TA to ensure its reliability.Mount the chip by Surface Mount.The ispLSI? 2000VEseries FPGA is one of these types.There are 176pins on the chip.When using this device, YEScan also be found.The ISPLSI 2128indicates that related parts can be found.The 6000gates serve as building blocks for digital circuits.In total, there are 32 logic elements/blocks.A power supply of 3.3Vis required to operate it.Initially, the maximum supply voltage (Vsup) is 3.6V.To detect input signals, there are 4 dedicated inputs.Ensure that the supply voltage (Vsup) exceeds 3V.It should not exceed 77MHzin terms of clockfrequency.
ISPLSI 2128VE-100LTN176 Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
176 pin count
3.3V power supplies
ISPLSI 2128VE-100LTN176 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128VE-100LTN176 CPLDs applications.
- Handheld digital devices
- Digital multiplexers
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Programmable polarity
- DMA control
- Programmable power management
- PLC analog input modules
- Software Configuration of Add-In Boards
- Wide Vin Industrial low power SMPS
- I2C BUS INTERFACE
