ISPLSI 2128VE-135LBN208
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 208-BGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 208 |
| JESD-30 Code | S-PBGA-B208 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 128 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
ISPLSI 2128VE-135LBN208 Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).A 208-BGA package contains the item.As you can see, this device has 128 I/O ports programmed into it.There are 208 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of BOTTOMand is connected to the ground.It is powered from a supply voltage of 3.3V.It is included in Programmable Logic Devices.Package the chip by Tray.The operating temperature of the machine is 0°C~70°C TA to ensure its reliability.Ensure that the chip is mounted by Surface Mount.The ispLSI? 2000VEseries FPGA is one of these types.It is programmed with 208 pins.When using this device, YESis also available.The ISPLSI 2128contains its related parts.A digital circuit is built using 6000gates.There are 32 logic elements or blocks present.It runs on a voltage of 3.3Vvolts.Vsup reaches 3.6Vas the maximum supply voltage.The input signals are detected by 4dedicated inputs.Voltage supply (Vsup) should be higher than 3V.It is recommended that the clock frequency not exceed 100MHz.
ISPLSI 2128VE-135LBN208 Features
208-BGA package
128 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
3.3V power supplies
ISPLSI 2128VE-135LBN208 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128VE-135LBN208 CPLDs applications.
- Reset swapping
- Discrete logic functions
- Handheld digital devices
- DMA control
- Address decoding
- Pattern recognition
- I2C BUS INTERFACE
- Digital multiplexers
- Programmable power management
- Bootloaders for FPGAs
