ISPLSI 2128VE-135LT100
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2128VE-135LT100 Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is contained in package [0].The device is programmed with 64 I/Os.The device is programmed with 100 terminations.QUADis the terminal position of this electrical part.A voltage of 3.3Vprovides power to the device.It is a part of the family [0].It is recommended that the chip be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the ispLSI? 2000VE series.In this chip, the 100pins are programmed.It is also characterized by YES.You can find its related parts in the [0].6000gates are devices that serve as building blocks for digital circuits.There are 32 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.This device runs on 3.3Vvolts of electricity.A maximum supply voltage (Vsup) of 3.6V is provided.It has 4dedicated inputs for detecting input signals.If the supply voltage (Vsup) is greater than 3V, then the device will work properly.The clock frequency of the device should not exceed 100MHz.
ISPLSI 2128VE-135LT100 Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
3.3V power supplies
ISPLSI 2128VE-135LT100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128VE-135LT100 CPLDs applications.
- Digital designs
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- I2C BUS INTERFACE
- Discrete logic functions
- Software Configuration of Add-In Boards
- INTERRUPT SYSTEM
- Configurable Addressing of I/O Boards
- Handheld digital devices
- PLC analog input modules
- Portable digital devices
