ISPLSI 2128VE-135LT100I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2128VE-135LT100I Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).You can find it in package [0].In this case, there are 64 I/Os programmed.The termination of a device is set to [0].This electrical part is wired with a terminal position of QUAD.The power supply voltage is 3.3V.It is a part of family [0].Trayis the packaging method.To ensure its reliability, the operating temperature is set to [0].It is mounted in the way of Surface Mount.The ispLSI? 2000VEseries comprises this type of FPGA.Chips are programmed with 100 pins.Additionally, this device is capable of displaying [0].In accordance with the [0], its related parts are listed.It is possible to construct digital circuits using 6000gates, which are devices that serve as building blocks.There are 32 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.A power supply of 3.3Vvolts is required to operate this device.Supply voltage (Vsup) reaches a maximum of 3.6V.There are 4 dedicated inputs used to detect the status of input signals.It is recommended that the supply voltage (Vsup) be greater than 3V.clock frequency should not exceed [0].
ISPLSI 2128VE-135LT100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
3.3V power supplies
ISPLSI 2128VE-135LT100I Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128VE-135LT100I CPLDs applications.
- Synchronous or asynchronous mode
- ROM patching
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- PLC analog input modules
- USB Bus
- Address decoders
- Page register
- Software Configuration of Add-In Boards
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Pattern recognition
