ISPLSI 2128VE-135LT176
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 176 |
| JESD-30 Code | S-PQFP-G176 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 128 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2128VE-135LT176 Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).You can find it in package [0].There are 128 I/Os on the board.The device is programmed with 176 terminations.This electrical part has a terminal position of QUADand is connected to the ground.There is 3.3V voltage supply for this device.It belongs to the family [0].Trayis the packaging method.During operation, the operating temperature is kept at 0°C~70°C TA to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.FPGAs belonging to the ispLSI? 2000VEseries contain this type of chip.It is programmed with 176 pins.It is also characterized by YES.The ISPLSI 2128indicates that its related parts can be found.There are 6000 gates, which are devices that acts as a building block for digital circuits. In total, there are 32 logic elements/blocks.There is 3.3V power supply available for it.There is a maximum supply voltage (Vsup) of 3.6V.The input signals are detected by 4dedicated inputs.Vsup (supply voltage) must be greater than 3V.The clock frequency of the device should not exceed 100MHz.
ISPLSI 2128VE-135LT176 Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
176 pin count
3.3V power supplies
ISPLSI 2128VE-135LT176 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128VE-135LT176 CPLDs applications.
- Interface bridging
- White goods (Washing, Cold, Aircon ,...)
- Configurable Addressing of I/O Boards
- Software-driven hardware configuration
- Power Meter SMPS
- Dedicated input registers
- Handheld digital devices
- Boolean function generators
- Discrete logic functions
- Code converters
