ISPLSI 2128VE-135LTN100
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
ISPLSI 2128VE-135LTN100 Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].The device is programmed with 64 I/Os.There is a 100terminations set on devices.Its terminal position is QUAD.A voltage of 3.3Vprovides power to the device.It belongs to the family [0].Trayis the packaging method.Ensure its reliability by operating at [0].It is recommended that Surface Mountholds the chip in place.FPGAs belonging to the ispLSI? 2000VEseries contain this type of chip.100pins are programmed on the chip.The device can also be used to find [0].The ISPLSI 2128indicates that its related parts can be found.A digital circuit is built using 6000gates.32logic elements/blocks exist.The system runs on a power supply of 3.3V watts.3.6Vis the maximum supply voltage (Vsup).Input signals are detected using 4dedicated inputs.It is recommended that the supply voltage (Vsup) be greater than 3V.Ideally, its clock frequency should not exceed 100MHz.
ISPLSI 2128VE-135LTN100 Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
3.3V power supplies
ISPLSI 2128VE-135LTN100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128VE-135LTN100 CPLDs applications.
- Digital multiplexers
- Timing control
- Power automation
- DDC INTERFACE
- Digital systems
- INTERRUPT SYSTEM
- Complex programmable logic devices
- Dedicated input registers
- Field programmable gate
- State machine design
