ISPLSI 2128VE-135LTN176I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 176 |
| JESD-30 Code | S-PQFP-G176 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 128 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | RoHS Compliant |
ISPLSI 2128VE-135LTN176I Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is part of the 176-LQFP package.As you can see, this device has 128 I/O ports programmed into it.176terminations are programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.The power source is powered by 3.3Vvolts.The part is included in Programmable Logic Devices.Trayshould be used for packaging the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the ispLSI? 2000VE series.It has 176pins programmed.If you use this device, you will also find [0].Its related parts can be found in the [0].6000gates are used to construct digital circuits.This logic block consists of 32logic elements.A power supply of 3.3Vvolts is required to operate this device.Vsup reaches 3.6Vas the maximum supply voltage.A total of 4dedicated inputs are available for detecting the status of input signals.It is important that the supply voltage (Vsup) exceeds 3VV.Ideally, its clock frequency should not exceed 100MHz.
ISPLSI 2128VE-135LTN176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~85°C TA
176 pin count
3.3V power supplies
ISPLSI 2128VE-135LTN176I Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128VE-135LTN176I CPLDs applications.
- Digital systems
- Power up sequencing
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Parity generators
- Wide Vin Industrial low power SMPS
- Protection relays
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Power Meter SMPS
- Synchronous or asynchronous mode
- I2C BUS INTERFACE
