ISPLSI 2128VE-180LT100
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 125MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2128VE-180LT100 Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.100-LQFPis the package in which it resides.In this case, there are 64 I/Os programmed.100terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power source is powered by 3.3Vvolts.It is a part of family [0].It is packaged in the way of Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The ispLSI? 2000VEseries comprises this type of FPGA.The chip is programmed with 100 pins.The ISPLSI 2128indicates that its related parts can be found.6000gates are used to construct digital circuits.There are a total of 32 logic elements or blocks.Currently, it is powered by 3.3Vsources.Initially, the maximum supply voltage (Vsup) is 3.6V.A total of 4dedicated inputs are available for detecting the status of input signals.In order to operate properly, the supply voltage (Vsup) should be greater than 3V.It should not exceed 125MHzin its clock frequency.
ISPLSI 2128VE-180LT100 Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
3.3V power supplies
ISPLSI 2128VE-180LT100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128VE-180LT100 CPLDs applications.
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- State machine control
- Digital designs
- Code converters
- Cross-Matrix Switch
- Timing control
- STANDARD SERIAL INTERFACE UART
- INTERRUPT SYSTEM
- Programmable power management
- Multiple Clock Source Selection
