ISPLSI 2128VE-180LT176
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 176 |
| JESD-30 Code | S-PQFP-G176 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 128 |
| Clock Frequency | 125MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2128VE-180LT176 Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is part of the 176-LQFP package.There are 128 I/Os on the board.176terminations have been programmed into the device.QUADis the terminal position of this electrical part.Power is provided by a supply voltage of 3.3V volts.It belongs to the family [0].It is recommended that the chip be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].Surface Mountshould be used for mounting the chip.FPGAs belonging to the ispLSI? 2000VEseries contain this type of chip.With 176pins programmed, the chip is ready to use.According to the ISPLSI 2128, its related parts can be found.It is possible to construct digital circuits using 6000gates, which are devices that serve as building blocks.32logic elements/blocks exist.It runs on a voltage of 3.3Vvolts.The maximal supply voltage (Vsup) reaches 3.6V.To detect the status of input signals, there are 4dedicated inputs.If the supply voltage (Vsup) is greater than 3V, then the device will work properly.A frequency of 125MHzshould not be exceeded by its clock.
ISPLSI 2128VE-180LT176 Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
176 pin count
3.3V power supplies
ISPLSI 2128VE-180LT176 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128VE-180LT176 CPLDs applications.
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Software-Driven Hardware Configuration
- Interface bridging
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Digital systems
- Software-driven hardware configuration
- Synchronous or asynchronous mode
- White goods (Washing, Cold, Aircon ,...)
- PLC analog input modules
- Power up sequencing
