ISPLSI 2128VE-250LT100
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 158MHz |
| Propagation Delay | 6 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 4ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2128VE-250LT100 Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.100-LQFPis the package in which it resides.In this case, there are 64 I/Os programmed.100terminations have been programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.It is powered from a supply voltage of 3.3V.It is a part of the family [0].Package the chip by Tray.To ensure reliability, the device operates at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.This type of FPGA is a part of the ispLSI? 2000VE series.In this chip, the 100pins are programmed.It is also characterized by YES.According to the ISPLSI 2128, its related parts can be found.In digital circuits, there are 6000gates, which act as a basic building block.There are 32 logic elements or blocks present.The system runs on a power supply of 3.3V watts.The maximal supply voltage (Vsup) reaches 3.6V.To detect input signals, there are 4 dedicated inputs.There should be a higher supply voltage (Vsup) than 3V.It should not exceed 158MHzin its clock frequency.
ISPLSI 2128VE-250LT100 Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
3.3V power supplies
ISPLSI 2128VE-250LT100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128VE-250LT100 CPLDs applications.
- Code converters
- Pattern recognition
- Power up sequencing
- Multiple DIP Switch Replacement
- Address decoding
- DDC INTERFACE
- Complex programmable logic devices
- STANDARD SERIAL INTERFACE UART
- Field programmable gate
- Bootloaders for FPGAs
