ISPLSI 2128VE-250LTN100
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 2128 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 158MHz |
| Propagation Delay | 6 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 4ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
ISPLSI 2128VE-250LTN100 Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is contained in package [0].In this case, there are 64 I/Os programmed.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical component is QUAD.The power source is powered by 3.3Vvolts.This part is part of the family [0].It is packaged in the way of Tray.Ensure its reliability by operating at [0].It is recommended that Surface Mountholds the chip in place.The FPGA belongs to the ispLSI? 2000VE series.There are 100pins on the chip.This device can also display [0].Its related parts can be found in the [0].6000gates are used to construct digital circuits.A logic element or block has 32elements.The system runs on a power supply of 3.3V watts.3.6Vrepresents the maximal supply voltage (Vsup).Input signals are detected using 4dedicated inputs.Vsup (supply voltage) must be greater than 3V.The clock frequency should not exceed 158MHz.
ISPLSI 2128VE-250LTN100 Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
3.3V power supplies
ISPLSI 2128VE-250LTN100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2128VE-250LTN100 CPLDs applications.
- D/T registers and latches
- DMA control
- ToR/Aggregation/Core Switch and Router
- LED Lighting systems
- Wide Vin Industrial low power SMPS
- Battery operated portable devices
- Software-driven hardware configuration
- Dedicated input registers
- I/O expansion
- State machine control
