ISPLSI 2192VE-100LT128
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2192 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 77MHz |
| Propagation Delay | 13 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 5 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2192VE-100LT128 Overview
192 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the 128-LQFPpackage, you will find it.As you can see, this device has 96 I/O ports programmed into it.128terminations have been programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered by a voltage of 3.3V volts.There is a part in the family [0].It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.Surface Mountshould be used for mounting the chip.In FPGA terms, it is a type of ispLSI? 2000VEseries FPGA.It is programmed with 128 pins.If this device is used, you will also be able to find [0].You can find its related parts in the [0].For digital circuits, there are 8000gates. These devices serve as building blocks.48logic elements/blocks exist.In order for the device to operate, it requires 3.3V power supplies.A maximum supply voltage (Vsup) of 3.6V is provided.There are 5 dedicated inputs used to detect the status of input signals.Vsup (supply voltage) must be greater than 3V.It should not exceed 77MHzin its clock frequency.
ISPLSI 2192VE-100LT128 Features
128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
3.3V power supplies
ISPLSI 2192VE-100LT128 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2192VE-100LT128 CPLDs applications.
- Digital multiplexers
- Software Configuration of Add-In Boards
- Digital systems
- DMA control
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- ON-CHIP OSCILLATOR CIRCUIT
- LED Lighting systems
- STANDARD SERIAL INTERFACE UART
- Field programmable gate
- Interface bridging
