ISPLSI 2192VE-180LB144
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 144-BGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2192 |
| Pin Count | 144 |
| JESD-30 Code | S-PBGA-B144 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 125MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 2.1mm |
| Length | 13mm |
| Width | 13mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2192VE-180LB144 Overview
Currently, there are 192 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There is a 144-BGA package containing it.The device is programmed with 96 I/Os.It is programmed to terminate devices at [0].The terminal position of this electrical component is BOTTOM.Power is provided by a supply voltage of 3.3V volts.There is a part included in Programmable Logic Devices.It is recommended to package the chip by Tray.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.The chip should be mounted by Surface Mount.It is a type of FPGA belonging to the ispLSI? 2000VE series.144pins are programmed on the chip.The ISPLSI 2192indicates that related parts can be found.There are 8000 gates, which are devices that acts as a building block for digital circuits. This logic block consists of 48logic elements.It runs on a voltage of 3.3Vvolts.Initially, the maximum supply voltage (Vsup) is 3.6V.The status of input signals is detected by 8dedicated inputs.If the supply voltage (Vsup) is greater than 3V, then the device will work properly.It should not exceed 125MHzin terms of clockfrequency.
ISPLSI 2192VE-180LB144 Features
144-BGA package
96 I/Os
The operating temperature of 0°C~70°C TA
144 pin count
3.3V power supplies
ISPLSI 2192VE-180LB144 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2192VE-180LB144 CPLDs applications.
- Cross-Matrix Switch
- Programmable polarity
- Multiple Clock Source Selection
- Programmable power management
- DMA control
- Digital designs
- Digital multiplexers
- Interface bridging
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Custom state machines
