ISPLSI 2192VE-180LT128
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2192 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 125MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 5 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2192VE-180LT128 Overview
Currently, there are 192 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is contained in package [0].The device is programmed with 96 I/O ports.128terminations are programmed into the device.QUADis the terminal position of this electrical part.Power is provided by a supply voltage of 3.3V volts.It is a part of the family [0].Trayshould be used for packaging the chip.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.The chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispLSI? 2000VE series.It is programmed with 128 pins.The ISPLSI 2192shows its related parts.As a building block for digital circuits, there are 8000gates.There are 48 logic elements/blocks.A power supply of 3.3Vvolts is required to operate this device.There is a maximum supply voltage (Vsup) of 3.6V.To detect the status of input signals, there are 5dedicated inputs.It is recommended that the supply voltage (Vsup) be greater than 3V.The clock frequency of this device should not exceed 125MHz.
ISPLSI 2192VE-180LT128 Features
128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
3.3V power supplies
ISPLSI 2192VE-180LT128 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2192VE-180LT128 CPLDs applications.
- Software-driven hardware configuration
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Auxiliary Power Supply Isolated and Non-isolated
- INTERRUPT SYSTEM
- Power Meter SMPS
- Pattern recognition
- POWER-SAVING MODES
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- PLC analog input modules
- Power automation
