ISPLSI 2192VE-180LTN128I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 2192 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 125MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 5 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
ISPLSI 2192VE-180LTN128I Overview
There are 192 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).A 128-LQFP package contains the item.It is equipped with 96I/O ports.Terminations of devices are set to [0].There is a QUADterminal position on the electrical part in question.The power source is powered by 3.3Vvolts.The part belongs to Programmable Logic Devices family.It is packaged in the way of Tray.Due to its reliability, it is operated at a temperature of [0].It is recommended to mount the chip by Surface Mount.This type of FPGA is a part of the ispLSI? 2000VE series.With 128pins programmed, the chip is ready to use.When using this device, YEScan also be found.There are related parts in [0].In digital circuits, there are 8000gates, which act as a basic building block.In total, there are 48 logic elements/blocks.Currently, it is powered by 3.3Vsources.In this case, the maximum supply voltage (Vsup) is 3.6V.Input signals are detected by 5dedicated inputs.Voltage supply (Vsup) should be higher than 3V.The clock frequency should not exceed 125MHz.
ISPLSI 2192VE-180LTN128I Features
128-LQFP package
96 I/Os
The operating temperature of -40°C~85°C TA
128 pin count
3.3V power supplies
ISPLSI 2192VE-180LTN128I Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2192VE-180LTN128I CPLDs applications.
- ON-CHIP OSCILLATOR CIRCUIT
- Field programmable gate
- I/O expansion
- Auxiliary Power Supply Isolated and Non-isolated
- Voltage level translation
- PLC analog input modules
- Configurable Addressing of I/O Boards
- Complex programmable logic devices
- Power up sequencing
- Discrete logic functions
