ISPLSI 2192VE-225LT128
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2192 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.2 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 5 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 4ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2192VE-225LT128 Overview
192macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.128-LQFPis the package in which it resides.There are 96 I/Os on the board.It is programmed that device terminations will be 128 .Its terminal position is QUAD.A voltage of 3.3V is used as the power supply for this device.The part belongs to Programmable Logic Devices family.Trayis the packaging method.Due to its reliability, it is operated at a temperature of [0].It is recommended to mount the chip by Surface Mount.The ispLSI? 2000VEseries comprises this type of FPGA.There are 128pins on the chip.This device can also display [0].In accordance with the [0], its related parts are listed.For digital circuits, there are 8000gates. These devices serve as building blocks.There are a total of 48 logic elements or blocks.A power supply of 3.3Vis required to operate it.In order to ensure proper operation, a maximum supply voltage (Vsup) of 3.6V is required.To detect the status of input signals, there are 5dedicated inputs.There should be a higher supply voltage (Vsup) than 3V.It is recommended that the clock frequency not exceed 150MHz.
ISPLSI 2192VE-225LT128 Features
128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
3.3V power supplies
ISPLSI 2192VE-225LT128 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2192VE-225LT128 CPLDs applications.
- I2C BUS INTERFACE
- State machine design
- Synchronous or asynchronous mode
- Dedicated input registers
- Power up sequencing
- Cross-Matrix Switch
- TIMERS/COUNTERS
- Pattern recognition
- Complex programmable logic devices
- Storage Cards and Storage Racks
