ISPLSI 5128VE-80LT128I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 5000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 5128 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 56MHz |
| Propagation Delay | 12 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 12ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 5128VE-80LT128I Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.A 128-LQFP package contains the item.It is equipped with 96I/O ports.Terminations of devices are set to [0].QUADis the terminal position of this electrical part.Power is provided by a supply voltage of 3.3V volts.It belongs to the family [0].It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].It is recommended to mount the chip by Surface Mount.FPGAs belonging to the ispLSI? 5000VEseries contain this type of chip.It has 128pins programmed.The device can also be used to find [0].ISPLSI 5128contains its related parts.6000gates are devices that serve as building blocks for digital circuits.There are 4 logic elements/blocks.A total of 2.5/3.33.3V power supplies are needed to run it.In this case, the maximum supply voltage (Vsup) is 3.6V.A supply voltage (Vsup) of greater than 3V should be used.Ideally, its clock frequency should not exceed 56MHz.
ISPLSI 5128VE-80LT128I Features
128-LQFP package
96 I/Os
The operating temperature of -40°C~85°C TA
128 pin count
2.5/3.33.3V power supplies
ISPLSI 5128VE-80LT128I Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 5128VE-80LT128I CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- D/T registers and latches
- State machine control
- Software Configuration of Add-In Boards
- Dedicated input registers
- Software-driven hardware configuration
- Voltage level translation
- Pattern recognition
- Programmable polarity
- Protection relays
