ISPLSI 5256VA-100LB208
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 208-BGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 5000VA |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Base Part Number | ISPLSI 5256 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 144 |
| Clock Frequency | 69MHz |
| Propagation Delay | 13 ns |
| Number of Gates | 12000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 5256VA-100LB208 Overview
There are 256 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.There is a 208-BGA package containing it.As you can see, this device has 144 I/O ports programmed into it.208terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power source is powered by 3.3Vvolts.It is a part of the family [0].It is recommended to package the chip by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.Surface Mountshould be used for mounting the chip.As part of the ispLSI? 5000VAseries, it is a type of FPGA.In this chip, the 208pins are programmed.The ISPLSI 5256indicates that related parts can be found.In digital circuits, there are 12000gates, which act as a basic building block.8logic blocks/elements are present.Currently, it is powered by 2.5/3.33.3Vsources.3.6Vrepresents the maximal supply voltage (Vsup).It is recommended that the supply voltage (Vsup) be greater than 3V.Ideally, its clock frequency should not exceed 69MHz.
ISPLSI 5256VA-100LB208 Features
208-BGA package
144 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
2.5/3.33.3V power supplies
ISPLSI 5256VA-100LB208 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 5256VA-100LB208 CPLDs applications.
- Synchronous or asynchronous mode
- State machine control
- DDC INTERFACE
- Voltage level translation
- Power automation
- Page register
- Software-driven hardware configuration
- Complex programmable logic devices
- Boolean function generators
- Custom shift registers
