ISPLSI 5256VE-100LT100
| Parameters | |
|---|---|
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 5256 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 72 |
| Clock Frequency | 67MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 12000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 5000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
ISPLSI 5256VE-100LT100 Overview
This network has 256macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).You can find it in package [0].This device has 72 I/O ports programmed into it.100terminations are programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.An electrical supply voltage of 3.3V is used to power it.It is a part of family [0].Trayis the packaging method.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.There should be a Surface Mounton the chip.This type of FPGA is a part of the ispLSI? 5000VE series.It has 100pins programmed.It is also possible to find YESwhen using this device.The ISPLSI 5256indicates that related parts can be found.12000gates are used to construct digital circuits.A logic element or block has 8elements.The system runs on a power supply of 2.5/3.33.3V watts.3.6Vrepresents the maximal supply voltage (Vsup).It should be possible for Vsup to exceed 3Vat the supply voltage.The clock frequency of this device should not exceed 67MHz.
ISPLSI 5256VE-100LT100 Features
100-LQFP package
72 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
2.5/3.33.3V power supplies
ISPLSI 5256VE-100LT100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 5256VE-100LT100 CPLDs applications.
- Configurable Addressing of I/O Boards
- Multiple Clock Source Selection
- Random logic replacement
- I/O expansion
- Handheld digital devices
- D/T registers and latches
- DDC INTERFACE
- Voltage level translation
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Complex programmable logic devices
