ISPLSI 5256VE-125LT128I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 5000VE |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | ISPLSI 5256 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Propagation Delay | 7.5 ns |
| Number of Gates | 12000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 5256VE-125LT128I Overview
This network has 256macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is packaged with 128-LQFP.The device is programmed with 96 I/Os.128terminations have been programmed into the device.QUADis the terminal position of this electrical part.A voltage of 3.3V is used as the power supply for this device.This part is in the family [0].It is recommended to package the chip by Tray.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.It is mounted in the way of Surface Mount.It belongs to the ispLSI? 5000VEseries of FPGAs.There are 128pins on the chip.When using this device, YEScan also be found.ISPLSI 5256contains its related parts.In digital circuits, there are 12000gates, which act as a basic building block.There are a total of 8 logic elements or blocks.A total of 2.5/3.33.3V power supplies are needed to run it.In this case, the maximum supply voltage (Vsup) is 3.6V.If the supply voltage (Vsup) is greater than 3V, then the device will work properly.
ISPLSI 5256VE-125LT128I Features
128-LQFP package
96 I/Os
The operating temperature of -40°C~85°C TA
128 pin count
2.5/3.33.3V power supplies
ISPLSI 5256VE-125LT128I Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 5256VE-125LT128I CPLDs applications.
- Protection relays
- DDC INTERFACE
- State machine design
- Address decoders
- Synchronous or asynchronous mode
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- I/O PORTS (MCU MODULE)
- Wide Vin Industrial low power SMPS
- Multiple DIP Switch Replacement
- INTERRUPT SYSTEM
