ISPLSI 5256VE-165LT100
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 5000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 5256 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 72 |
| Propagation Delay | 6 ns |
| Number of Gates | 12000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 6ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 5256VE-165LT100 Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a 100-LQFP package containing it.It is programmed with 72 I/Os.It is programmed that device terminations will be 100 .Its terminal position is QUAD.There is 3.3V voltage supply for this device.There is a part in the family [0].The chip should be packaged by Tray.During operation, the operating temperature is kept at 0°C~70°C TA to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The ispLSI? 5000VEseries comprises this type of FPGA.It is programmed with 100 pins.It is also possible to find YESwhen using this device.The ISPLSI 5256indicates that its related parts can be found.12000gates are used to construct digital circuits.In total, there are 8 logic elements/blocks.A total of 2.5/3.33.3V power supplies are needed to run it.Vsup reaches 3.6Vas the maximum supply voltage.Voltage supply (Vsup) should be higher than 3V.
ISPLSI 5256VE-165LT100 Features
100-LQFP package
72 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
2.5/3.33.3V power supplies
ISPLSI 5256VE-165LT100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 5256VE-165LT100 CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Multiple DIP Switch Replacement
- Power up sequencing
- Synchronous or asynchronous mode
- Preset swapping
- State machine control
- POWER-SAVING MODES
- Battery operated portable devices
- Discrete logic functions
- State machine design
