ISPLSI 5256VE-165LT128
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 5000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 5256 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Propagation Delay | 6 ns |
| Number of Gates | 12000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 6ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 5256VE-165LT128 Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is enclosed in a 128-LQFP package.As you can see, this device has 96 I/O ports programmed into it.Terminations of devices are set to [0].The terminal position of this electrical component is QUAD.Power is supplied by a voltage of 3.3V volts.It belongs to the family [0].It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.It is recommended to mount the chip by Surface Mount.In terms of FPGAs, it belongs to the ispLSI? 5000VE series.With 128pins programmed, the chip is ready to use.This device also displays [0].ISPLSI 5256contains its related parts.A digital circuit is built using 12000gates.There are a total of 8 logic elements or blocks.A total of 2.5/3.33.3V power supplies are needed to run it.Supply voltage (Vsup) reaches a maximum of 3.6V.In order to operate properly, the supply voltage (Vsup) should be greater than 3V.
ISPLSI 5256VE-165LT128 Features
128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
2.5/3.33.3V power supplies
ISPLSI 5256VE-165LT128 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 5256VE-165LT128 CPLDs applications.
- Wide Vin Industrial low power SMPS
- DDC INTERFACE
- USB Bus
- Cross-Matrix Switch
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- PULSE WIDTH MODULATION (PWM)
- State machine design
- Pattern recognition
- Auxiliary Power Supply Isolated and Non-isolated
- Field programmable gate
