ISPLSI 5256VE-80LT100I
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 5000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 5256 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 72 |
| Clock Frequency | 56MHz |
| Propagation Delay | 12 ns |
| Number of Gates | 12000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 12ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
ISPLSI 5256VE-80LT100I Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is enclosed in a 100-LQFP package.The device is programmed with 72 I/Os.100terminations have been programmed into the device.This electrical part is wired with a terminal position of QUAD.A voltage of 3.3V is used as the power supply for this device.This part is in the family [0].Trayis the packaging method.Due to its reliability, it is operated at a temperature of [0].Mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the ispLSI? 5000VE series.With 100pins programmed, the chip is ready to use.Additionally, this device is capable of displaying [0].The ISPLSI 5256indicates that its related parts can be found.12000gates are used to construct digital circuits.This logic element/block contains 8logic elements.Currently, it is powered by 2.5/3.33.3Vsources.In this case, the maximum supply voltage (Vsup) is 3.6V.Voltage supply (Vsup) should be higher than 3V.The clock frequency should not exceed 56MHz.
ISPLSI 5256VE-80LT100I Features
100-LQFP package
72 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
2.5/3.33.3V power supplies
ISPLSI 5256VE-80LT100I Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 5256VE-80LT100I CPLDs applications.
- LED Lighting systems
- DDC INTERFACE
- Custom shift registers
- Cross-Matrix Switch
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Field programmable gate
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Code converters
- DMA control
