ISPLSI 5512VA-100LQ208
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 5000VA |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 5512 |
| Pin Count | 208 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 144 |
| Clock Frequency | 69MHz |
| Propagation Delay | 13 ns |
| Number of Gates | 24000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 5512VA-100LQ208 Overview
A mobile phone network consists of 512macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is embedded in the 208-BFQFP package.The device is programmed with 144 I/O ports.There are 208 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 3.3V is used as the power supply for this device.There is a part in the family [0].It is recommended to package the chip by Tray.To ensure its reliability, the operating temperature is set to [0].It is mounted in the way of Surface Mount.This type of FPGA is a part of the ispLSI? 5000VA series.With 208pins programmed, the chip is ready to use.The ISPLSI 5512contains its related parts.There are 24000 gates, which are devices that acts as a building block for digital circuits. There are 16 logic elements/blocks.It runs on a voltage of 2.5/3.33.3Vvolts.3.6Vis the maximum supply voltage (Vsup).Ensure that the supply voltage (Vsup) exceeds 3V.A frequency of 69MHzshould not be exceeded by its clock.
ISPLSI 5512VA-100LQ208 Features
208-BFQFP package
144 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
2.5/3.33.3V power supplies
ISPLSI 5512VA-100LQ208 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 5512VA-100LQ208 CPLDs applications.
- Digital multiplexers
- INTERRUPT SYSTEM
- Bootloaders for FPGAs
- I/O PORTS (MCU MODULE)
- Configurable Addressing of I/O Boards
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Preset swapping
- I/O expansion
- Digital designs
- High speed graphics processing
