banner_page

ISPLSI3256E-100LB320

5V 0.5mm PMIC 320 Pin 100MHz 5V BGA


  • Manufacturer: Lattice Semiconductor
  • Nocochips NO: 477-ISPLSI3256E-100LB320
  • Package: BGA
  • Datasheet: -
  • Stock: 470
  • Description: 5V 0.5mm PMIC 320 Pin 100MHz 5V BGA (Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case BGA
Number of Pins 320
Moisture Sensitivity Level (MSL) 3
Number of Terminations 320
ECCN Code EAR99
Max Operating Temperature 70°C
Min Operating Temperature 0°C
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position BOTTOM
Terminal Form BALL
Supply Voltage 5V
Terminal Pitch 0.5mm
Frequency 100MHz
Pin Count 320
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Operating Supply Current 300mA
Number of I/O 256
Nominal Supply Current 300mA
Memory Type EEPROM
Propagation Delay 13 ns
Turn On Delay Time 13 ns
Frequency (Max) 100MHz
Programmable Logic Type EE PLD
Number of Gates 11000
Number of Logic Blocks (LABs) 32
Output Function MACROCELL
Number of Macro Cells 256
JTAG BST YES
In-System Programmable YES
Height Seated (Max) 4.5mm
Length 40mm
Width 40mm
Radiation Hardening No
RoHS Status RoHS Compliant

ISPLSI3256E-100LB320 Overview


There are 256 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.In the BGApackage, you will find it.The device is programmed with 256 I/O ports.It is programmed to terminate devices at [0].There is a BOTTOMterminal position on the electrical part in question.There is 5V voltage supply for this device.There is a part in the family [0].The chip is programmed with 320 pins.In digital circuits, 11000gates serve as building blocks.In order to maintain high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.It is mounted by Surface Mount.This board has 320 pins.A maximum voltage of 5.25Vis required for operation.With a minimal supply voltage of [0], it operates.In order for the device to operate, it requires 5V power supplies.This can be achieved at a frequency of 100MHz.In order to operate, the temperature should be higher than 0°C.It is recommended that the operating temperature be lower than 70°C.There are 32 logic blocks (LABs) in its basic building block.It is recommended that the maximum frequency is less than 0.There is a type of programmable logic called EE PLD.

ISPLSI3256E-100LB320 Features


BGA package
256 I/Os
320 pin count
320 pins
5V power supplies
32 logic blocks (LABs)

ISPLSI3256E-100LB320 Applications


There are a lot of Lattice Semiconductor ISPLSI3256E-100LB320 CPLDs applications.

  • DDC INTERFACE
  • DMA control
  • Cross-Matrix Switch
  • Address decoding
  • SUPERVISORY FUNCTION (LVD AND WATCHDOG)
  • Power Meter SMPS
  • Code converters
  • STANDARD SERIAL INTERFACE UART
  • Storage Cards and Storage Racks
  • Battery operated portable devices

Write a review

Note: HTML is not translated!
    Bad           Good