Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-LQFP |
Number of Pins |
48 |
Operating Temperature |
0°C~70°C |
Packaging |
Tray |
Published |
2000 |
Series |
ispClock™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution, Zero Delay Buffer |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ISPPAC-CLK53 |
Output |
eHSTL, HSTL, LVCMOS, LVTTL, SSTL |
Pin Count |
48 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
150mA |
Frequency (Max) |
267MHz |
Input |
HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL |
Ratio - Input:Output |
2:12 |
PLL |
Yes with Bypass |
Differential - Input:Output |
Yes/No |
fmax-Min |
267 MHz |
Length |
7mm |
Width |
7mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
ISPPAC-CLK5312S-01TN48C Overview
This clock IC is packaged using the Tray method. The 48-LQFP package contains this clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. In it, there are 48 terminations to be found. This electronic frequency generator requires a voltage of 3.3V. There is a Clock PLL called HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL which is designed to be the input to this clock generator. 1 circuits are implemented to access the electronic component's full performance. Providing a maximum frequency of 267MHz, this clock-based RF synthesizer is suitable for a variety of applications. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. This frequency synthesizer requires a supply voltage above 3V to be safe. There should be 3V~3.6V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. This is a clock generator compatible with eHSTL, HSTL, LVCMOS, LVTTL, SSTL logic levels. Clock Generator, Fanout Distribution, Zero Delay Buffer is the type of electrical part that this component is classified as. An IC that generates clocks specifically for microprocessors, this clock PLL is 48-bits in si48e. This part number ISPPAC-CLK53 is related to the following electrical components. There are a number of 48 pins that are available on the frequency synthesizers. The maximum supply voltage that clock generator can handle is 3.3V. And basically, this clock generator is often classified as a kind of Clock Drivers. This clock generator is a member of ispClock? series.
ISPPAC-CLK5312S-01TN48C Features
Available in the 48-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ISPPAC-CLK5312S-01TN48C Applications
There are a lot of Lattice Semiconductor Corporation ISPPAC-CLK5312S-01TN48C Clock Generators applications.
- Peripheral devices
- Navigation, positioning and surveillance system for aircraft, ships and ships
- VSAT (Small Ground Satellite Station)
- Digital HDTV systems
- Time to digital converters
- Notebooks
- Signal modulation and demodulation
- Precision auxiliary angle deflection measurement
- Phase modulation cellular systems
- Wireless infrastructure