Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-LQFP |
Number of Pins |
48 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tray |
Published |
2000 |
Series |
ispClock™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution, Zero Delay Buffer |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ISPPAC-CLK53 |
Output |
eHSTL, HSTL, LVCMOS, LVTTL, SSTL |
Pin Count |
48 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
150mA |
Frequency (Max) |
267MHz |
Input |
HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL |
Ratio - Input:Output |
2:12 |
PLL |
Yes with Bypass |
Differential - Input:Output |
Yes/No |
fmax-Min |
267 MHz |
Length |
7mm |
Width |
7mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
ISPPAC-CLK5312S-01TN48I Overview
As a clock IC, it uses the Tray package. A Clock PLL is included with the 48-LQFP package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. There are 48 terminations found in this file. Clock generator ics require a voltage of 3.3V. This Clock PLL will be fed by HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL as its input. It is possible to access the full performance of the electrical part by implementing 1 circuits. 267MHz is the maximal value for normal operation. Thanks to the Surface Mount, this electric component can easily be installed on a panel. The maximum voltage this clock PLL can handle is 3.6V. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. The RF synthesizer is compatible with eHSTL, HSTL, LVCMOS, LVTTL, SSTL logic levels. This electronic component is usually classified as a Clock Generator, Fanout Distribution, Zero Delay Buffer component. Microprocessors are specifically designed to use this clock-generating IC, which has a 48-bit output. According to the base part number ISPPAC-CLK53, its related parts can be found. There is a 48 pin that is available on the frequency synthesizers. Electronic frequency generator can handle voltages up to 3.3V. As a result, it is commonly classified as a type of Clock Drivers clock PLL. A member of the ispClock? series, this electronic component is made of plastic.
ISPPAC-CLK5312S-01TN48I Features
Available in the 48-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ISPPAC-CLK5312S-01TN48I Applications
There are a lot of Lattice Semiconductor Corporation ISPPAC-CLK5312S-01TN48I Clock Generators applications.
- Ports
- Multiplexing communication
- Closed circuit systems
- Digital switching systems
- Automatic control system test
- 1 Gigabit Ethernet
- Tracking filters
- Coherent detection of the signal
- Multi-function printers
- Wi-Fi routers