ISPPAC-CLK5510V-01T48I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2000 |
| Series | ispClock™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPPAC-CLK5510 |
| Output | HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL |
| Pin Count | 48 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 150mA |
| Frequency (Max) | 320MHz |
| Family | 5500 |
| Input | HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL |
| Ratio - Input:Output | 1:10 |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| fmax-Min | 320 MHz |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
ISPPAC-CLK5510V-01T48I Overview
This clock IC is packaged using the Tray method. The 48-LQFP package contains this clock generator. Frequency generator can maintain a maximum temperature of 240 under reflowing conditions. In it, there are 48 terminations to be found. The supply voltage of 3.3V allows for high efficiency. A clock generator's input is called HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL and it is designed as the input for this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. There is a maximum frequency of 320MHz Max with this clock-based frequency generator. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximal supply voltage (Vsup) reaches 3.6V. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. The temperature should be set at -40°C~85°C to ensure reliable performance. There are several logic levels in HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL logic that can be used with this clock generator. An IC that generates clocks specifically for microprocessors, this clock PLL is 48-bits in si48e. It is possible to find its related electronic parts by searching for the base part number ISPPAC-CLK5510. It is possible to connect to the frequency generators via 48 pins. The maximum supply voltage that clock generator can handle is 3.3V. A Clock Drivers clock generator is essentially what this device is. A member of the ispClock? series, this electronic component is made of plastic. 10 signal outputs maximi10e the output frequency. This clock generator offers low timing skew at 0.05 ns Max. A search for the 5500 family will yield similar electronic components. The logic IC PLL clock adopts is PLL BASED CLOCK DRIVER.
ISPPAC-CLK5510V-01T48I Features
Available in the 48-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ISPPAC-CLK5510V-01T48I Applications
There are a lot of Lattice Semiconductor Corporation ISPPAC-CLK5510V-01T48I Clock Generators applications.
- Satellite navigation communication
- Small signal recovery
- Skew suppression
- Infotainment systems
- Media broadcast servers
- Simple clock clean-up circuits
- Microwave backhaul IF
- Laptops
- Multiplexing communication
- Peripheral devices
