ISPPAC-CLK5610AV-01TN48I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2000 |
| Series | ispClock™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISPPAC-CLK5610A |
| Output | EHSTL, HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL |
| Pin Count | 48 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 7mA |
| Frequency (Max) | 400MHz |
| Family | 5600 |
| Input | HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL |
| Ratio - Input:Output | 1:10 |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Propagation Delay (tpd) | 8.8 ns |
| Divider/Multiplier | Yes/No |
| fmax-Min | 400 MHz |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ISPPAC-CLK5610AV-01TN48I Overview
Clock generator is packaged in the way of Tray. As part of the 48-LQFP package, this clock generator is embedded. This clock generator ic can sustain a maximum temperature of 260 during reflowing. In it, there are 48 terminations to be found. The clock generator ic should be grounded with a voltage of 3.3V. As the Clock PLL's input, HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL is designed to be used in order to generate the clock signal. A total of 1 circuits are implemented to access the full performance of the electrical part. The frequency generator has a maximum frequency of 400MHz. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. This clock generator would require a maximum supply voltage of 3.6V. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. Clock generator ic works with 3V~3.6V. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. The frequency synthesizer in this product is compatible with all levels of EHSTL, HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL logic. This clock-generating IC is a 48-bit device designed explicitly for microprocessors. According to the base part number, its related parts can be founded. PF synthesizers is equipped with 48 pins. In terms of the supply voltage, PLL clock can handle 3.3V volts. This clock generator can be classified as a kind of Clock Drivers in general. ispClock? series electronic parts are included in this product. Clock PLL is configured with 10 output. As a result of this digital clock generator, there is a low timing skew at 0.05 ns max. A search for the 5600 family will yield similar electronic components. PLL BASED CLOCK DRIVER logic circuits are primarily constructed using this time clock generator. At a frequency of 10MHz, the system can achieve high efficiency.
ISPPAC-CLK5610AV-01TN48I Features
Available in the 48-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ISPPAC-CLK5610AV-01TN48I Applications
There are a lot of Lattice Semiconductor Corporation ISPPAC-CLK5610AV-01TN48I Clock Generators applications.
- Frequency Modulation (FM) stereo decoders
- Frequency shifting decodes
- FM demodulation networks for FM operations
- Telecommunication systems
- Pagers
- Digital switching systems
- Closed circuit systems
- Peripheral devices
- Signal modulation and demodulation
- Coherent detection of the signal
