banner_page

ISPPAC-CLK5620V-01T100C

3.3V 320MHz ISPPAC-CLK5620 Clock Generators ispClock? Series 100 Pins 100-LQFP 100 Terminals Surface Mount 3V~3.6V Tray


  • Manufacturer: Lattice Semiconductor Corporation
  • Nocochips NO: 477-ISPPAC-CLK5620V-01T100C
  • Package: 100-LQFP
  • Datasheet: PDF
  • Stock: 265
  • Description: 3.3V 320MHz ISPPAC-CLK5620 Clock Generators ispClock? Series 100 Pins 100-LQFP 100 Terminals Surface Mount 3V~3.6V Tray (Kg)

Details

Tags

Parameters
Operating Temperature 0°C~70°C
Packaging Tray
Published 2000
Series ispClock™
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Clock Drivers
Voltage - Supply 3V~3.6V
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ISPPAC-CLK5620
Output HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL
Pin Count 100
Qualification Status Not Qualified
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Frequency (Max) 320MHz
Family 5600
Input HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL
Ratio - Input:Output 2:20
Logic IC Type PLL BASED CLOCK DRIVER
PLL Yes with Bypass
Differential - Input:Output Yes/Yes
Divider/Multiplier Yes/No
fmax-Min 320 MHz
Same Edge Skew-Max (tskwd) 0.05 ns
RoHS Status Non-RoHS Compliant
Lead Free Lead Free
Mounting Type Surface Mount
Package / Case 100-LQFP
Surface Mount YES

ISPPAC-CLK5620V-01T100C Overview


Clock ICs are packaged using the Tray method. The 100-LQFP package contains this clock generator. A maximum temperature of 240 can be sustained by this clock generator ic during reflowing. 100 terminations can be found in frequency synthesizer. To operate this time clock generator, 3.3V voltage should be applied. There is a Clock PLL called HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL which is designed to be the input to this clock generator. 1 circuits are used to achieve clock PLL's superior flexibility. A clock-based RF synthesizer that provides a max frequency of 320MHz is available. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. Clock generator ic works with 3V~3.6V. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. In this case, we are dealing with a frequency synthesizer that can be used with HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL logic levels. There is a 100-bit clock-generating IC built specifically for microprocessors in this frequency generator. According to the base part number, its related parts can be founded. In general, this clock PLL is considered a Clock Drivers device. There are a number of electronic parts in the ispClock? series, including this one. Low timing skew is provided by this analog clock generator at maximum 0.05 ns. This PLL belongs to the family of 5600. The logic IC PLL clock adopts is PLL BASED CLOCK DRIVER.

ISPPAC-CLK5620V-01T100C Features


Available in the 100-LQFP
Supply voltage of 3.3V

ISPPAC-CLK5620V-01T100C Applications


There are a lot of Lattice Semiconductor Corporation ISPPAC-CLK5620V-01T100C Clock Generators applications.

  • Multi-function printers
  • Infotainment systems
  • Mobile telephones
  • Phase modulation cellular systems
  • High-speed optical transport network (OTN)
  • Frequency shifting decodes
  • Navigation, positioning and surveillance system for aircraft, ships and ships
  • Small signal recovery
  • Cellular/4G
  • Integrated phase noise in aerospace systems

Write a review

Note: HTML is not translated!
    Bad           Good