ITS410E2
| Parameters | |
|---|---|
| Package / Case | TO-220-5 |
| Surface Mount | NO |
| Number of Pins | 5 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 190mOhm |
| Terminal Finish | TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -30°C |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | ZIG-ZAG |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Max Output Current | 5A |
| Operating Supply Voltage | 42V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Voltage | 6V |
| Power Dissipation-Max | 50W |
| Nominal Supply Current | 1mA |
| Current | 1.8A |
| Power Dissipation | 50W |
| Max Supply Current | 1mA |
| Current - Output | 1.6A |
| Min Input Voltage | 4.7V |
| Max Input Voltage | 42V |
| Halogen Free | Not Halogen Free |
| Output Current per Channel | 1.8A |
| Drain to Source Voltage (Vdss) | 65V |
| Nominal Input Voltage | 42V |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 1 |
| Load Current | 1.8A |
| Output Peak Current Limit-Nom | 1.8A |
| Drain to Source Resistance | 220mOhm |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 4.4mm |
| Length | 9.9mm |
| Width | 9.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
ITS410E2 Overview
There is a TO-220-5 package that includes this.In total, it has 5 terminations.Device ZIG-ZAG is in the terminal position.There are a total of 3 pins on it.High efficiency can be achieved by using 12V as supply voltage.5 pins are used in operation.A gadget like this is self-contained in Peripheral Drivers.For stable operation, 85°C°C is the maximum operating temperature.At a minimum working temperature of -30°C degrees Celsius, it maintains its reliability.The default setting is output 1.In order to satisfy the operation criteria, the maximum output current must drop to 5A.In order for it to operate, a current of 1mA is required.Devices have 190mOhm resistance.
ITS410E2 Features
The terminal position of 3
ITS410E2 Applications
There are a lot of Infineon Technologies ITS410E2 hot swap controllers applications.
- Loads
- Current monitoring
- Industrial high-side switches
- PC board hot swap insertion and removal
- Industrial
- Continuous monitoring of device temperature
- Temperature monitor output
- Avionics systems
- Limitting the inrush current
- Identify faulty boards
