ITS410E2E3043
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 190mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -30°C |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 5A |
| Operating Supply Voltage | 42V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Power Dissipation-Max | 50W |
| Nominal Supply Current | 1mA |
| Current - Output | 1.6A |
| Turn On Delay Time | 125 μs |
| Min Input Voltage | 4.7V |
| Max Input Voltage | 42V |
| Output Current per Channel | 1.8A |
| Turn-Off Delay Time | 85 μs |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 1.8A |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
ITS410E2E3043 Overview
The TO-220-5 package includes it.5 terminations are present in total.The terminal position of the device is SINGLE.In total, it has 3 pins.High efficiency can be achieved when the supply voltage is 12V.Hot-swappable device is necessary to use 5 pins in order to operate the device.There is nothing else in Peripheral Drivers but this gadget.The position of the object is in the direction of Through Hole.Operating at 85°C°C allows for stable operation.Hot-swappable device works at a minimum temperature of -30°C degrees Celsius to maintain reliabilHot-swappable devicey.Hot Swap is defaulted to output 1.In order to meet the operation criteria, the maximum output current must be reduced to 5A.190mOhm resistance is present in the device.
ITS410E2E3043 Features
The terminal position of 3
ITS410E2E3043 Applications
There are a lot of Infineon Technologies ITS410E2E3043 hot swap controllers applications.
- Industrial computers and servers
- Distributed power systems
- Identify faulty boards
- Current limit and current foldback limit functions
- Network switches
- Continuous monitoring of device temperature
- Power monitoring
- Circuit power protectors
- Disconnect faulty loads before supply voltage drops
- Overcurrent protection
