ITS410E2E3043HKSA1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 50W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | ITS410E2 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.8A |
| Supply Voltage-Max (Vsup) | 42V |
| Supply Voltage-Min (Vsup) | 4.7V |
| Interface | On/Off |
| Nominal Supply Current | 1mA |
| Output Configuration | High Side |
| Power Dissipation | 50W |
| Output Current | 1.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.7V~42V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.8A |
| Rds On (Typ) | 190m Ω |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ITS410E2E3043HKSA1 Overview
It is package in Tube case.This package is included in TO-220-5.The LED driver is mounted as Through Hole.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -30°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts.Features of the lighting driver are Auto Restart, Status Flag.This object belongs to the ITS410E2 family.It contains 5 terminations.During operation, the 5 pins are used.As far as the lighting driver is concerned, there are 1 functions.Maximum output current falls to 1.8A when operation criteria are met.A supply voltage of 12V leads to high efficiency.Through Hole is mounted in the way of this LED driving board.The LED driver has a total of 3 pins.It is included in the PROFET? series.The output current is set to 1.6A in this case.In this case, Vsup (maximum supply voltage) is set to 42V.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 4.7V.
ITS410E2E3043HKSA1 Features
Supplied from 12V
ITS410E2E3043HKSA1 Applications
There are a lot of Infineon Technologies ITS410E2E3043HKSA1 Power Switches ICs applications.
- Portable Video Game Players
- PC Card Hot Swap
- Mobile Communication Devices
- HDD and SSD
- Handheld Devices
- Hot Swap
- Hot-Swap Systems
- USB Ports/Hubs
- Portable GPS Device
- Wearable Devices
