ITS410E2HKSA1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 50W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ITS410E2 |
| Pin Count | 3 |
| JESD-30 Code | R-PZFM-T5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.8A |
| Supply Voltage-Max (Vsup) | 42V |
| Supply Voltage-Min (Vsup) | 4.7V |
| Interface | On/Off |
| Nominal Supply Current | 1mA |
| Output Configuration | High Side |
| Power Dissipation | 50W |
| Output Current | 1.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.7V~42V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.8A |
| Rds On (Typ) | 190m Ω |
| Turn Off Time | 85 μs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ITS410E2HKSA1 Overview
As you can see, it's packaged in the way of a Tube.The TO-220-5 Formed Leads package contains it.The lighting driver is mounted in the Through Hole position.There is a switch type of General Purpose.It is best to set the temperature to -30°C~85°C TA to ensure reliable operation.The LED driver has a total of 1 outputs.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is N-Channel volts.Features of the lighting driver are Auto Restart, Status Flag.I believe it belongs to the ITS410E2 family.It contains 5 terminations.The LED driver has 1 functions.Maximum output current falls to 1.8A when operation criteria are met.High efficiency is possible at 12V supply voltage.In this case, it is mounted in the way of Through Hole.In total, it has 3 pins.This electrical component can be found in the PROFET? series.When this is the case, the output current is set to 1.6A.The Vsup value (maximum supply voltage) is set to 42V.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 4.7V.
ITS410E2HKSA1 Features
Supplied from 12V
ITS410E2HKSA1 Applications
There are a lot of Infineon Technologies ITS410E2HKSA1 Power Switches ICs applications.
- Wearable Devices
- USB3.1 Power Delivery
- Mobile Communication Devices
- USB Ports/Hubs
- PDAs
- Solid State Drivers
- Wireless/Networking Cards
- Portable GPS
- Set-Top Boxes
- USB Power Distribution
