ITS4200SMEOHUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Weight | 188.014037mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Resistance | 320mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.4W |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Operating Supply Voltage | 45V |
| Interface | On/Off |
| Nominal Supply Current | 1mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 100 μs |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Nominal Input Voltage | 13.5V |
| Turn-Off Delay Time | 150 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 11V~45V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 150m Ω |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ITS4200SMEOHUMA1 Overview
It is package in Cut Tape (CT) case.The TO-261-4, TO-261AA package includes it.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.There is a default setting of 1 for output.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.The operation is performed through the 4 pins.The maximum output current is reduced to 700mA to meet the operation criteria.Surface Mount is mounted in the way of this LED driving board.In this case, there is 320mOhm resistance in the LED driving board.A supply voltage of 45V is recommended for maximum efficiency.
ITS4200SMEOHUMA1 Features
Resistance of 320mOhm
ITS4200SMEOHUMA1 Applications
There are a lot of Infineon Technologies ITS4200SMEOHUMA1 Power Switches ICs applications.
- Portable GPS
- Wireless Modem Data Cards
- Hot Swap
- HDD, SSD
- USB Ports/Hubs
- Handheld Devices
- Portable Video Game Players
- Hot Swap
- HDD and SSD
- Storage Drives
