ITS4200SMEPHUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Weight | 188.014037mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Resistance | 320mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.4W |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.4A |
| Operating Supply Voltage | 45V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 1.4W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 100 μs |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Nominal Input Voltage | 13.5V |
| Turn-Off Delay Time | 150 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 11V~45V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 150m Ω |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ITS4200SMEPHUMA1 Overview
As a result, it is packaged in the form of a Cut Tape (CT).There is a package for it in the TO-261-4, TO-261AA package.In this case, the LED driving board is mounted as Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.The lighting driver has a total of 1 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.The 4 pins are used for the operation of the system.In order to meet the operation criteria, the maximum output current drops to 1.4A.The lighting driver is mounted in the direction of Surface Mount.It has a resistance of 320mOhm.It is recommended to set the supply voltage to 45V for optimum efficiency.
ITS4200SMEPHUMA1 Features
Resistance of 320mOhm
ITS4200SMEPHUMA1 Applications
There are a lot of Infineon Technologies ITS4200SMEPHUMA1 Power Switches ICs applications.
- Portable Music Players
- Smartphone and PDA
- Telecom and Network Systems
- Mobile Communication Devices
- Smart Phones, Feature Phones
- Handheld Devices
- Set-Top Boxes
- Storage Drives
- PDAs
- Portable GPS
